亚洲天堂久久综合_噜噜噜视频在线观看_韩国久久久久久级做爰片_国产成人亚洲综合色影视_亚洲av日韩av成人av_国产亚洲欧美精品一区

Language: Chinese line English

centrifugal fan

  • 4-72 centrifugal fan - copy
  • 4-72 centrifugal fan - copy
4-72 centrifugal fan - copy4-72 centrifugal fan - copy

4-72 centrifugal fan - copy

  • 4-72
  • 4-72 centrifugal fan
  • 4-72 centrifugal fan
  • 4-72 centrifugal fan
  • Product description: The main use of 4-72 type centrifugal fan for indoor ventilation in general factories and large buildings or the air transport and other non flammable, explosive, volatile, the human body harmless gas
  • INQUIRY
The main use of 4-72 type centrifugal fan for indoor ventilation in general factories and large buildings or the air transport and other non flammable, explosive, volatile, the human body harmless gas corrosion of steel; B4-72 type centrifugal fan can discharge flammable, volatile gases; F4-72 centrifugal fan is mainly used for conveying corrosive gases. However, 4-72, B4-72, F4-72 centrifugal fan conveying gas are not allowed to contain viscous substances, containing dust and hard particles are not more than 150mg/m3, the gas temperature shall not exceed 80 degrees C.
The performance of B4-72 type fan with optional part and foundation of size and 472 type, can be selected according to the sample. The fan structure is basically the same with the 4-72 type motor, No. 2.8A - 6A with B35 type flange and foot, No. 6 - 12C, D and Y series motor selection table corresponding to the YB series, the installation type is B3.
F4-72 type centrifugal fan is made of stainless steel, glass fiber reinforced plastic or other corrosion resistant materials, the performance and the size of the foundation are the same as that of the 4-72 centrifugal fan.
4-72 type centrifugal fan fan is first used in China, but also the most common fan, from high-rise buildings and underground railways, boiler blast to plant ventilation, from the northern border to the South China Sea, from the western plateau to the east side down, 4-72 fans everywhere.

type


From one end of the motor face, where the impeller clockwise rotation are known as "right whirlwind machine" to "right", otherwise, it is called "left whirlwind machine" to "left".
The fan outlet position in said casing outlet angle, 4-72 fan no 2.8 - 6 in the factory are made of a type, the use of units according to requirements to install into the desired position, in order to indicate. The No. 2.8 outlet position adjustment range is 0 degrees, 225 degrees, the interval is 22.5 degrees; No. 8 - 12 outlet adjustment range is 0 degrees, 225 degrees interval is 45 degrees; No. 16, the 20 air outlet angle made of three kinds of fixed 0 degrees, 90 degrees, 180 degrees, can not be adjusted, specify when ordering.
A, B, C, D four kinds of transmission mode of fan: 4-72 fan, No. 2.8 - 5 by A transmission, No. 6 is A type transmission and C transmission, No. 8-12 by C, D two kinds of transmission mode, No. 16-20 using B type transmission.
If the machine number, transmission mode, outlet angle can not meet the needs of your production, our factory has the ability to transform or design for you until you are satisfied.
structure
4-72 type centrifugal fan No. 2.8 - 6A is mainly composed of impeller, casing, air inlet, motor and other components. No. 6C and No. 8 - 20 in addition to the structure, and the transmission part.
The impeller consists of 10 inclined - turbine airfoil blade, curved and flat wheel cover plate, steel (aluminum alloy B4-72) produced by the static and dynamic balance correction and overdrive experiment, high efficiency, stable and reliable operation, good performance of air.
A - made of two different types, including: No. 2.8 - 12 chassis as a whole, they cannot be separated. No. 16 - 20 housing made of three open, in addition to the level divided into two parts, the upper part along the vertical center line is divided into two halves, connected by bolts, so that the installation and maintenance into or out of the impeller.
The air inlet is made into an integral structure which is arranged on one side of the fan, and the cross section parallel to the axial direction is a curved shape.
Transmission - composed of spindle, bearing box, rolling bearing, pulley or coupling.
Performance and selection

The sample was given No. 10 prototype dimensionless performance table and dimensionless performance curve, a number of other machine dimensional performance parameters can be deduced

1

2

3

4

5

6

Φ

Ψ

Ψd

λ

ηin

0.1884

0.458

0.0335

0.0995

0.867

0.2051

0.452

0.0397

0.1045

0.887

0.2218

0.434

0.0465

0.1082

0.89

0.2361

0.413

0.0528

0.1106

0.882

0.25

0.39

0.594

0.1126

0.866

0.2637

0.363

0.0663

0.1137

0.842


Scan the qr codeClose
the qr code
主站蜘蛛池模板: 国产一级一区二区三区 | 久草色播 | 亚洲中国最大AV网站 | 日本水蜜桃视频 | 免费直接看黄网站 | 国产一区二区三区影视 | 亚洲午夜久久久久妓女影院 | 免费看涩涩视频网站入口88av | 天天综合网亚洲 | 白丝jk自慰高潮 | 女人啪啪免费av大片 | t∨澳门黄不让成人在线无码视频 | 91精品国产调教打屁股 | www.日韩在线 | 天天插天天透伊人 | free性足孕妇vⅰde0s | 日韩精品极品视频 | 日本一本在线观看 | 爱视频福利网 | 色综合一本 | 欧美激情福利 | 俄罗斯美女的天堂一级毛片 | 成人乱人乱一区二区三区软件 | www.黄.com | 范冰冰一级做a爰片久久毛片 | 国产亚洲欧美在线 | 三级视频一区 | 啊灬用力灬啊灬啊灬啊灬日本视频 | 网站黄国产 | 国产第一页无线好源 | 色吊丝在线永久观看最新版本 | 国产精品亚洲精品久久 | 天堂a免费视频在线观看 | 免费成人激情视频 | 手机在线黄色网址 | www.夜| 色婷婷播放 | 在线免费高清视频 | 全黄a免费一级毛片人人爱 一级日b视频 | 日韩一级在线观看视频 | 成人在线免费公开观看视频 |