Support

Causes of current overload of titanium fan running motor

The titanium fan is a machine that relies on the input of mechanical energy to increase the gas pressure and send the gas side by side. It is the 1 kind of fluid machinery that is driven. Widely used in: electroplating, chemical industry, petroleum, textile, power station, laboratory, etc.. Need ventilation and ventilation and process transportation containing acidic, alkaline or high humidity water vapor and other corrosive gas and general explosive gas, in electroplating equipment, coating equipment and laboratory equipment, chemical laboratory supporting ventilation, etc.

Titanium fan motor overcurrent eight reasons:
1. The spindle speed exceeds the rated value.
2. Affected by the severe vibration of the bearing seat.
3. The flow rate exceeds the specified value or the air duct leaks.
4. Affected by the deterioration of the working condition of the parallel fan.
5. The gate in the trachea is not tightly closed when driving (out).
6. The motor input voltage is too low or the power supply is single-phase power failure.
7. The coupling connection is not correct, the rubber ring is too tight or the clearance is uneven.
8. The density of the gas conveyed by the fan is too high or the temperature is too low, so that the pressure is too high.

When the motor current of the titanium fan is too large, it is easy to cause a series of problems, so when encountering such problems, it must be solved in time to prevent future troubles. If the motor input voltage of the titanium fan is too low or the power supply is cut off in one direction, check the voltage in time and whether the power supply is normal. The coupling connection is not correct, the belt ring is too tight or the gap is uneven, and the adjustment is correct, it is also necessary to readjust and align it. If the joint work of the ventilator deteriorates or the pipe network fails, the working point of the joint work of the ventilator must be adjusted to repair the pipe network system.

PREVIOUS：The role of stainless steel fan in the enclos NEXT：How to control the temperature of the stainle